KURYAKYN MAGNUM QUICK CLAMPS

Kuryakyn has  made a lot of friends with these! Stainless steel construction for superior strength and hinged design for fast simple installation. No more stripped bolt heads!

Note:
• Cobra engine guards are 1-1/4" diameter.
• Frame down tubes on VN1500 and some other Metric cruisers are 1.35" diameter.
• The curved part of a Valkyrie® engine guard in front of the valve covers will accept a 1-1/8" clamp.
• Most Victory frame tubes are 1-1/4" diameter.

Helpful Hint:
If you are unsure of the diameter of the tubing on which you'd like to install the highway pegs and don't have a dial caliper at your disposal, here is an easy way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8", 1-1/4", 1.35", and 1-1/2" until you find one that will fit.